COMPOSITION
- 
SlowMoVideo – How to make a slow motion shot with the open source programRead more: SlowMoVideo – How to make a slow motion shot with the open source programhttp://slowmovideo.granjow.net/ slowmoVideo is an OpenSource program that creates slow-motion videos from your footage. Slow motion cinematography is the result of playing back frames for a longer duration than they were exposed. For example, if you expose 240 frames of film in one second, then play them back at 24 fps, the resulting movie is 10 times longer (slower) than the original filmed event…. Film cameras are relatively simple mechanical devices that allow you to crank up the speed to whatever rate the shutter and pull-down mechanism allow. Some film cameras can operate at 2,500 fps or higher (although film shot in these cameras often needs some readjustment in postproduction). Video, on the other hand, is always captured, recorded, and played back at a fixed rate, with a current limit around 60fps. This makes extreme slow motion effects harder to achieve (and less elegant) on video, because slowing down the video results in each frame held still on the screen for a long time, whereas with high-frame-rate film there are plenty of frames to fill the longer durations of time. On video, the slow motion effect is more like a slide show than smooth, continuous motion. One obvious solution is to shoot film at high speed, then transfer it to video (a case where film still has a clear advantage, sorry George). Another possibility is to cross dissolve or blur from one frame to the next. This adds a smooth transition from one still frame to the next. The blur reduces the sharpness of the image, and compared to slowing down images shot at a high frame rate, this is somewhat of a cheat. However, there isn’t much you can do about it until video can be recorded at much higher rates. Of course, many film cameras can’t shoot at high frame rates either, so the whole super-slow-motion endeavor is somewhat specialized no matter what medium you are using. (There are some high speed digital cameras available now that allow you to capture lots of digital frames directly to your computer, so technology is starting to catch up with film. However, this feature isn’t going to appear in consumer camcorders any time soon.) 
- 
Mastering Camera Shots and Angles: A Guide for FilmmakersRead more: Mastering Camera Shots and Angles: A Guide for Filmmakershttps://website.ltx.studio/blog/mastering-camera-shots-and-angles 1. Extreme Wide Shot  2. Wide Shot  3. Medium Shot  4. Close Up  5. Extreme Close Up  
- 
Composition – cinematography Cheat SheetRead more: Composition – cinematography Cheat Sheet Where is our eye attracted first? Why? Size. Focus. Lighting. Color. Size. Mr. White (Harvey Keitel) on the right. 
 Focus. He’s one of the two objects in focus.
 Lighting. Mr. White is large and in focus and Mr. Pink (Steve Buscemi) is highlighted by
 a shaft of light.
 Color. Both are black and white but the read on Mr. White’s shirt now really stands out.
 (more…)
 What type of lighting?
DESIGN
COLOR
- 
What light is best to illuminate gems for resaleRead more: What light is best to illuminate gems for resalewww.palagems.com/gem-lighting2 Artificial light sources, not unlike the diverse phases of natural light, vary considerably in their properties. As a result, some lamps render an object’s color better than others do. The most important criterion for assessing the color-rendering ability of any lamp is its spectral power distribution curve. Natural daylight varies too much in strength and spectral composition to be taken seriously as a lighting standard for grading and dealing colored stones. For anything to be a standard, it must be constant in its properties, which natural light is not. For dealers in particular to make the transition from natural light to an artificial light source, that source must offer: 
 1- A degree of illuminance at least as strong as the common phases of natural daylight.
 2- Spectral properties identical or comparable to a phase of natural daylight.A source combining these two things makes gems appear much the same as when viewed under a given phase of natural light. From the viewpoint of many dealers, this corresponds to a naturalappearance. The 6000° Kelvin xenon short-arc lamp appears closest to meeting the criteria for a standard light source. Besides the strong illuminance this lamp affords, its spectrum is very similar to CIE standard illuminants of similar color temperature.   
- 
Tim Kang – calibrated white light values in sRGB color spaceRead more: Tim Kang – calibrated white light values in sRGB color space8bit sRGB encoded 
 2000K 255 139 22
 2700K 255 172 89
 3000K 255 184 109
 3200K 255 190 122
 4000K 255 211 165
 4300K 255 219 178
 D50 255 235 205
 D55 255 243 224
 D5600 255 244 227
 D6000 255 249 240
 D65 255 255 255
 D10000 202 221 255
 D20000 166 196 2558bit Rec709 Gamma 2.4 
 2000K 255 145 34
 2700K 255 177 97
 3000K 255 187 117
 3200K 255 193 129
 4000K 255 214 170
 4300K 255 221 182
 D50 255 236 208
 D55 255 243 226
 D5600 255 245 229
 D6000 255 250 241
 D65 255 255 255
 D10000 204 222 255
 D20000 170 199 2558bit Display P3 encoded 
 2000K 255 154 63
 2700K 255 185 109
 3000K 255 195 127
 3200K 255 201 138
 4000K 255 219 176
 4300K 255 225 187
 D50 255 239 212
 D55 255 245 228
 D5600 255 246 231
 D6000 255 251 242
 D65 255 255 255
 D10000 208 223 255
 D20000 175 199 25510bit Rec2020 PQ (100 nits) 
 2000K 520 435 273
 2700K 520 466 358
 3000K 520 475 384
 3200K 520 480 399
 4000K 520 495 446
 4300K 520 500 458
 D50 520 510 482
 D55 520 514 497
 D5600 520 514 500
 D6000 520 517 509
 D65 520 520 520
 D10000 479 489 520
 D20000 448 464 520
- 
“Reality” is constructed by your brain. Here’s what that means, and why it matters.Read more: “Reality” is constructed by your brain. Here’s what that means, and why it matters.“Fix your gaze on the black dot on the left side of this image. But wait! Finish reading this paragraph first. As you gaze at the left dot, try to answer this question: In what direction is the object on the right moving? Is it drifting diagonally, or is it moving up and down?”  What color are these strawberries?  Are A and B the same gray?  
- 
No one could see the colour blue until modern timesRead more: No one could see the colour blue until modern timeshttps://www.businessinsider.com/what-is-blue-and-how-do-we-see-color-2015-2  The way humans see the world… until we have a way to describe something, even something so fundamental as a colour, we may not even notice that something it’s there. Ancient languages didn’t have a word for blue — not Greek, not Chinese, not Japanese, not Hebrew, not Icelandic cultures. And without a word for the colour, there’s evidence that they may not have seen it at all. 
 https://www.wnycstudios.org/story/211119-colorsEvery language first had a word for black and for white, or dark and light. The next word for a colour to come into existence — in every language studied around the world — was red, the colour of blood and wine. 
 After red, historically, yellow appears, and later, green (though in a couple of languages, yellow and green switch places). The last of these colours to appear in every language is blue.The only ancient culture to develop a word for blue was the Egyptians — and as it happens, they were also the only culture that had a way to produce a blue dye. 
 https://mymodernmet.com/shades-of-blue-color-history/True blue hues are rare in the natural world because synthesizing pigments that absorb longer-wavelength light (reds and yellows) while reflecting shorter-wavelength blue light requires exceptionally elaborate molecular structures—biochemical feats that most plants and animals simply don’t undertake. When you gaze at a blueberry’s deep blue surface, you’re actually seeing structural coloration rather than a true blue pigment. A fine, waxy bloom on the berry’s skin contains nanostructures that preferentially scatter blue and violet light, giving the fruit its signature blue sheen even though its inherent pigment is reddish. Similarly, many of nature’s most striking blues—like those of blue jays and morpho butterflies—arise not from blue pigments but from microscopic architectures in feathers or wing scales. These tiny ridges and air pockets manipulate incoming light so that blue wavelengths emerge most prominently, creating vivid, angle-dependent colors through scattering rather than pigment alone. (more…)
- 
PTGui 13 beta adds control through a Patch EditorRead more: PTGui 13 beta adds control through a Patch EditorAdditions: - Patch Editor (PTGui Pro)
- DNG output
- Improved RAW / DNG handling
- JPEG 2000 support
- Performance improvements
 
- 
Björn Ottosson – OKHSV and OKHSL – Two new color spaces for color pickingRead more: Björn Ottosson – OKHSV and OKHSL – Two new color spaces for color pickinghttps://bottosson.github.io/misc/colorpicker https://bottosson.github.io/posts/colorpicker/ https://www.smashingmagazine.com/2024/10/interview-bjorn-ottosson-creator-oklab-color-space/ One problem with sRGB is that in a gradient between blue and white, it becomes a bit purple in the middle of the transition. That’s because sRGB really isn’t created to mimic how the eye sees colors; rather, it is based on how CRT monitors work. That means it works with certain frequencies of red, green, and blue, and also the non-linear coding called gamma. It’s a miracle it works as well as it does, but it’s not connected to color perception. When using those tools, you sometimes get surprising results, like purple in the gradient. There were also attempts to create simple models matching human perception based on XYZ, but as it turned out, it’s not possible to model all color vision that way. Perception of color is incredibly complex and depends, among other things, on whether it is dark or light in the room and the background color it is against. When you look at a photograph, it also depends on what you think the color of the light source is. The dress is a typical example of color vision being very context-dependent. It is almost impossible to model this perfectly. I based Oklab on two other color spaces, CIECAM16 and IPT. I used the lightness and saturation prediction from CIECAM16, which is a color appearance model, as a target. I actually wanted to use the datasets used to create CIECAM16, but I couldn’t find them. IPT was designed to have better hue uniformity. In experiments, they asked people to match light and dark colors, saturated and unsaturated colors, which resulted in a dataset for which colors, subjectively, have the same hue. IPT has a few other issues but is the basis for hue in Oklab. In the Munsell color system, colors are described with three parameters, designed to match the perceived appearance of colors: Hue, Chroma and Value. The parameters are designed to be independent and each have a uniform scale. This results in a color solid with an irregular shape. The parameters are designed to be independent and each have a uniform scale. This results in a color solid with an irregular shape. Modern color spaces and models, such as CIELAB, Cam16 and Björn Ottosson own Oklab, are very similar in their construction.  By far the most used color spaces today for color picking are HSL and HSV, two representations introduced in the classic 1978 paper “Color Spaces for Computer Graphics”. HSL and HSV designed to roughly correlate with perceptual color properties while being very simple and cheap to compute. Today HSL and HSV are most commonly used together with the sRGB color space.  One of the main advantages of HSL and HSV over the different Lab color spaces is that they map the sRGB gamut to a cylinder. This makes them easy to use since all parameters can be changed independently, without the risk of creating colors outside of the target gamut.  The main drawback on the other hand is that their properties don’t match human perception particularly well. 
 Reconciling these conflicting goals perfectly isn’t possible, but given that HSV and HSL don’t use anything derived from experiments relating to human perception, creating something that makes a better tradeoff does not seem unreasonable. With this new lightness estimate, we are ready to look into the construction of Okhsv and Okhsl.  
- 
Pattern generatorsRead more: Pattern generatorshttp://qrohlf.com/trianglify-generator/ https://halftonepro.com/app/polygons# https://mattdesl.svbtle.com/generative-art-with-nodejs-and-canvas https://www.patterncooler.com/ http://permadi.com/java/spaint/spaint.html https://dribbble.com/shots/1847313-Kaleidoscope-Generator-PSD http://eskimoblood.github.io/gerstnerizer/ http://www.stripegenerator.com/ http://btmills.github.io/geopattern/geopattern.html http://fractalarchitect.net/FA4-Random-Generator.html https://sciencevsmagic.net/fractal/#0605,0000,3,2,0,1,2 https://sites.google.com/site/mandelbulber/home 
- 
Tobia Montanari – Memory Colors: an essential tool for ColoristsRead more: Tobia Montanari – Memory Colors: an essential tool for Coloristshttps://www.tobiamontanari.com/memory-colors-an-essential-tool-for-colorists/ “Memory colors are colors that are universally associated with specific objects, elements or scenes in our environment. They are the colors that we expect to see in specific situations: these colors are based on our expectation of how certain objects should look based on our past experiences and memories. For instance, we associate specific hues, saturation and brightness values with human skintones and a slight variation can significantly affect the way we perceive a scene. Similarly, we expect blue skies to have a particular hue, green trees to be a specific shade and so on. Memory colors live inside of our brains and we often impose them onto what we see. By considering them during the grading process, the resulting image will be more visually appealing and won’t distract the viewer from the intended message of the story. Even a slight deviation from memory colors in a movie can create a sense of discordance, ultimately detracting from the viewer’s experience.” 
- 
Akiyoshi Kitaoka – Surround biased illumination perceptionRead more: Akiyoshi Kitaoka – Surround biased illumination perceptionhttps://x.com/AkiyoshiKitaoka/status/1798705648001327209 The left face appears whitish and the right one blackish, but they are made up of the same luminance. https://community.wolfram.com/groups/-/m/t/3191015 Illusory staircase Gelb effect 
 https://www.psy.ritsumei.ac.jp/akitaoka/illgelbe.html
LIGHTING
- 
PTGui 13 beta adds control through a Patch EditorRead more: PTGui 13 beta adds control through a Patch EditorAdditions: - Patch Editor (PTGui Pro)
- DNG output
- Improved RAW / DNG handling
- JPEG 2000 support
- Performance improvements
 
COLLECTIONS
| Featured AI
| Design And Composition 
| Explore posts  
POPULAR SEARCHES
unreal | pipeline | virtual production | free | learn | photoshop | 360 | macro | google | nvidia | resolution | open source | hdri | real-time | photography basics | nuke
FEATURED POSTS
- 
PixelSham – Introduction to Python 2022
- 
AI Data Laundering: How Academic and Nonprofit Researchers Shield Tech Companies from Accountability
- 
Decart AI Mirage – The first ever World Transformation Model – turning any video, game, or camera feed into a new digital world, in real time
- 
Convert 2D Images or Text to 3D Models
- 
copypastecharacter.com – alphabets, special characters, alt codes and symbols library
- 
The Perils of Technical Debt – Understanding Its Impact on Security, Usability, and Stability
- 
Daniele Tosti Interview for the magazine InCG, Taiwan, Issue 28, 201609
- 
Matt Hallett – WAN 2.1 VACE Total Video Control in ComfyUI
Social Links
DISCLAIMER – Links and images on this website may be protected by the respective owners’ copyright. All data submitted by users through this site shall be treated as freely available to share.





































